Guide for patients & caregivers

What Does "Artifact" Mean on a Scan Report?

Artifact on a scan report means part of the image is distorted. Learn how motion, metal and technique cause it and when a repeat scan may be needed.

By SameCase EditorialUpdated 6 min read

Prepared with AI assistance and checked against the cited sources. No independent clinician review has been completed. How we prepare articles

What does "artifact" mean on a scan report?

On an X-ray, CT, MRI or ultrasound report, "artifact" (also spelled "artefact") means a feature in the image that is not part of your body's real structure. It is usually caused by movement, metal, or the physics of the imaging technique. An artifact is a comment on image quality, not a diagnosis.

Radiologists note artifacts so that the reader of the report knows which areas were seen clearly and which were partly hidden or distorted. Phrases such as "limited by motion artifact" or "degraded by metal artifact" explain how confident the report can be about that area.

This guide explains common report wording. It cannot judge your images or say whether your scan needs repeating; that depends on the radiologist and the clinician who requested it.

When should you contact your clinician sooner?

An artifact on its own is not an emergency. What matters is the reason for the scan and how you feel now.

For sudden severe symptoms, use your local emergency number rather than waiting for any scan. Otherwise, contact the team who requested the scan sooner if:

  • the report says the study was "non-diagnostic" or that the area of concern could not be assessed, and no plan has been made;
  • your symptoms are getting worse while you wait for a repeat or alternative test;
  • you have new symptoms that were not part of the original reason for the scan.

What is motion artifact?

Motion artifact happens when part of the body moves while images are being taken. It can look like blurring, doubling or streaks. NHS pages explain that you need to keep still during an X-ray, CT or MRI so that clear images can be taken, and you may be asked to hold your breath for parts of the scan.

Patient information from the American College of Radiology and the Radiological Society of North America notes that high-quality MRI images depend on keeping still and following breath-holding instructions. It says anxiety, confusion or severe pain can make lying still difficult, so image quality suffers, and that some MRI exams may be of limited quality if a person cannot hold their breath.

Not all movement is voluntary. A study of CT technologists notes that breathing, the heartbeat and movement of the bowel can all cause motion, and that injured patients or children frequently move during scanning. In that survey, motion was the artifact technologists reported seeing most often, especially in head CT, and preparing and communicating with the patient was seen as the main way to reduce it.

What is metal artifact?

Metal in or near the area being scanned can distort the picture. On CT, highly dense materials such as joint replacements and dental fillings can create bright and dark streaks that hide nearby tissue. On MRI, the ACR/RSNA guidance says implants and other metal objects can make it difficult to obtain clear images and may distort them.

This is why you are asked to remove jewellery, hair clips, coins and clothing with zips or metal fibres before X-ray, CT and MRI. Metal that is part of you, such as a joint replacement or surgical clips, cannot be removed, so the report may simply note the artifact. Radiology departments have techniques to reduce metal artifact, and a different type of scan may sometimes show the area better.

Always tell the radiography team about any implants or devices. With MRI this is also a safety matter, not just an image-quality one.

Can the scanning technique itself cause artifacts?

Yes. Each type of imaging has limits built into how it works:

  • Ultrasound: sound waves are disrupted by air or gas and cannot pass through bone, so bowel gas or ribs can hide what lies behind them. Larger body size can also weaken the image.
  • CT: streak, shading and ring artifacts can arise from dense objects, from the way the scanner measures X-rays or from detector calibration.
  • MRI: a large amount of fluid in the abdomen can create artifact and lower image quality, according to ACR/RSNA guidance.
  • X-ray: movement and positioning affect how clearly an area is seen, so you are asked to hold very still and may be repositioned for another view. X-rays also show little detail of muscles, tendons and joints.

Will I need a repeat scan because of an artifact?

Often not. Many reports mention a minor artifact that does not affect the answer to the clinical question. A small streak near a dental filling may be irrelevant to a scan of the chest, for example.

A repeat or different test is more likely when the artifact affects the exact area being investigated, when the report calls the study "limited" or "non-diagnostic" for that question, or when motion was severe. The CT study notes that motion artifacts can, in extreme cases, make images uninterpretable or lead to a false impression of disease, which is why radiologists flag them.

If a repeat is suggested, ask what will be done differently: a calmer setting, pain relief, help with breath-holding, a metal-reduction technique or a different test. If anxiety in the scanner was the problem, see our guide on MRI claustrophobia.

Questions to ask your clinician

These questions can help you understand what the artifact means for you:

  • Which part of the scan was affected by the artifact?
  • Did it affect the area you were looking at, or somewhere else?
  • Can you still answer the question the scan was meant to answer?
  • Is a repeat scan or a different test recommended, and why?
  • Is there anything I can do to help get clearer pictures next time?
  • Should I tell the scanning team about any implants, pain or anxiety beforehand?

How similar de-identified cases can help you prepare

On SameCase, patients and verified doctors share de-identified cases. Seeing how others with a report that mentioned motion or metal artifact discussed it with their care team may help you write down clearer questions.

Other people's cases cannot tell you whether your images are adequate or what a repeat scan would show. We suggest using them only to prepare for a conversation with your own clinician.

Sources and further reading

For patients & caregivers

Share your case and learn from others

Learn from doctors and other people's cases to find a way forward with your health problem. New cases are public immediately. Don't add names or identifying details.

Keep learning