Guide for patients & caregivers

What Does My FibroScan (Liver Stiffness) Result Mean?

FibroScan liver stiffness results explained: what kPa and CAP measure, how sources use cut-offs, what can skew a reading and questions to ask your clinician.

By SameCase EditorialUpdated 6 min read

Prepared with AI assistance and checked against the cited sources. No independent clinician review has been completed. How we prepare articles

What does a FibroScan result mean?

A FibroScan result usually reports liver stiffness in kilopascals (kPa) and a controlled attenuation parameter (CAP) in decibels per metre (dB/m). Stiffness is used to estimate scarring (fibrosis), and CAP is used to estimate fat (steatosis). Higher stiffness can suggest more scarring, but the number is always read alongside blood tests, history and the reason for the scan.

This guide is for adults looking at an existing FibroScan, also called vibration-controlled transient elastography, report. It explains the terms and the questions worth asking. It cannot stage a liver condition or say what a particular number means for one person.

Symptoms that need urgent care

A routine stiffness result is not an emergency in itself. New symptoms matter more than a number on a report. The NHS advises asking for an urgent GP appointment or contacting NHS 111 for a swollen tummy, legs, ankles or feet in people with possible liver scarring. Elsewhere, use the equivalent local urgent service.

The NHS advises calling emergency services or going to an emergency department straight away for the symptoms below. Do not wait for a follow-up appointment or a repeat scan.

  • Vomiting blood.
  • Sudden confusion or slurred speech.

What do kPa and CAP measure on a FibroScan?

Liver stiffness (often labelled LSM or E) comes from a gentle vibration sent through the liver. The scanner times how fast the resulting wave travels; it moves faster through stiffer tissue. A peer-reviewed review of the method gives the reportable stiffness range as 1.5 to 75 kPa. NIDDK notes that increased liver stiffness may be a sign of fibrosis.

CAP measures how much the ultrasound beam weakens as it passes through the liver. More fat weakens it more. The same review gives the CAP range as 100 to 400 dB/m. CAP gives an estimate of fat, not of inflammation or scarring.

Reports may also show an IQR/median value. This describes how consistent the separate readings were. The review states that the reading is usually built from at least ten valid measurements and that an IQR/median above 0.3 (30%) is commonly taken to mean lower reliability.

What is a normal or high liver stiffness score?

There is no single universal cut-off. Thresholds differ between liver conditions, probe types and guidelines, and services can use their own bands. Always ask which thresholds the reporting service used.

As one example, the Turkish Association for the Study of the Liver's practice guidance for metabolic dysfunction-associated steatotic liver disease (MASLD, previously called fatty liver disease) states that a stiffness below 8 kPa generally rules out advanced fibrosis, and values above 12 kPa are associated with a high likelihood of advanced fibrosis. The guidance stresses that results are interpreted in the clinical context, so values between these two numbers need a clinician's judgement. These figures apply to that condition and that guidance, not to every liver disease.

For CAP, the sources checked for this guide do not give a single agreed cut-off, so none is quoted here. Ask how your CAP value was graded and whether it changes any decision. If the scan was arranged because of fat seen on ultrasound, the guide on fatty liver on ultrasound with normal blood tests explains how stiffness testing fits in.

What can make a FibroScan reading inaccurate?

Stiffness is not caused only by scarring. Several things can raise the number or make it unreliable, so a high result is sometimes repeated or checked with another test.

  • Food and sugary drinks: RadiologyInfo notes that these affect stiffness measurements, which is why services ask people not to eat beforehand. NHS leaflets ask for no food or drink for two to three hours; follow your own service's instructions.
  • Liver inflammation: acute hepatitis, including alcohol-related hepatitis, can raise stiffness. RadiologyInfo says testing may be done once the inflammation has settled over a few weeks.
  • Congestion and blocked bile flow: the review lists raised venous pressure (as in some heart conditions) and cholestasis among things that increase stiffness. RadiologyInfo also names heart failure.
  • Alcohol: the review notes that stopping alcohol has been shown to lower stiffness readings in alcohol-related liver disease.
  • Body build: a thicker layer between the skin and liver may need a larger (XL) probe, and narrow spaces between the ribs can make measurement difficult.
  • Ascites: fluid in the abdomen can block the vibration. Some NHS services do not perform the test, or warn that it may not give a valid reading, when ascites is present.

Who cannot have a FibroScan and what happens next?

One NHS trust leaflet says the scan is not offered to people known or suspected to be pregnant or to people with an implanted device such as a pacemaker or defibrillator. Another says that accurate results can be difficult to obtain in about 10% of people. In that case, or when the result does not fit the overall picture, other tests such as a liver biopsy may be discussed.

After the scan, the result goes to the person who requested it. Next steps depend on the cause being investigated. Blood-based scores such as FIB-4 are often used alongside elastography, and a repeat scan may be planned over time. Do not change prescribed medicines because of a stiffness result without speaking to the prescriber.

Questions to ask about a FibroScan result

Bring the full report, not just a portal summary. These questions can help focus the discussion.

  • Which liver condition were these numbers interpreted for, and which cut-offs did the service use?
  • Was the reading reliable, including the number of valid measurements, the IQR/median and the probe size?
  • Could recent eating, alcohol, inflammation, heart problems or blocked bile flow have raised my stiffness reading?
  • How does this fit with my blood tests, any FIB-4 score and my ultrasound?
  • What does my CAP value add, and does it change anything?
  • Is a repeat scan or a different test planned, and when?

How can comparing similar cases help?

On SameCase, patients and verified doctors share de-identified cases. Reading how others with similar stiffness and CAP results described their tests, follow-up and questions can help you prepare for an appointment. Other people's cases cannot interpret your result, and the clinician who knows your history remains the right person to explain it.

Sources and further reading

For patients & caregivers

Share your case and learn from others

Learn from doctors and other people's cases to find a way forward with your health problem. New cases are public immediately. Don't add names or identifying details.

Keep learning